skip to main text

Printing Photographs Saved on USB Flash Drive

You can print the photograph saved on the USB flash drive easily.

  1. Make sure printer is turned on.

  2. Load photo paper.

  3. Insert USB flash drive into USB flash drive port.

    Important

    • If you already insert the USB flash drive to save the received faxes automatically, you cannot print the photographs even when the USB flash drive which contains the photo data is set.

      In this case, set Auto save setting in FAX settings to OFF and remove the USB flash drive for saving faxes, and then insert the USB flash drive which contains the photo data.

  4. Select Access medium on the HOME screen.

    The photo selection screen is displayed.

    Note

    • When the message informing you that the operation restriction is enabled, ask the administrator of the printer you are using.
    • If both photo files and PDF files are saved on the USB flash drive, the confirmation screen to select which file you print is displayed. Select Print photos in the displayed screen and press the OK button.
    • If no printable photo data is saved on the USB flash drive, Data of supported types are not saved. is displayed on the LCD.
    • If more than 2,000 photo data are saved on the USB flash drive, the photo data is split by group per 2,000 photos in reverse chronological order (date last modified) automatically. Check the message displayed on the LCD and press the OK button.

  5. Specify settings as necessary.

    figure: LCD

    1. Number of copies

      Specify by using the Numeric buttons.

    2. Selection photo

      Select the photo you want to print by using the LEFTRIGHT button.

    3. Print settings

      By pressing the right Function button, the print settings confirmation screen is displayed.

      On the print settings confirmation screen, you can change the settings of page size, media type, and print quality and so on.

    4. Date specification

      By pressing the center Function button, you can select photo with specifying the date (last modified date of data).

    5. Change view

      By pressing the left Function button, you can change the display method.

    Note

    • If you specify the number of copies for each photo, use the LEFTRIGHT button to display the photo you want to print and use the Numeric buttons to specify the number of copies when the desired photo is displayed.
    • You can also display the screen to specify the number of copies by pressing the OK button when the desired photo is displayed. When the screen to specify the number of copies is displayed, specify the number of copies by using the Numeric buttons. Press the OK button to display the photo selection screen.

  6. Press Color button.

    The printer starts printing.

Note

  • To cancel printing, press the Stop button.

  • You can add the print job by pressing the right Function button while printing.

Adding Print Job

You can add the print job (Reserve photo print) while printing photos.

figure: LCD

Follow the procedure below to add the print job.

  1. Press the right Function button when the print progress screen is displayed.

    The photo selection screen is displayed.

  2. Select the next photo to print.

    Note

    • While you select the photo, the printer prints the reserved photos.
    • The reserved photo icon appears on the photo included in the print job.

  3. Specify the number of copies for each photo.

    Note

    • While processing the print job, you cannot change the setting for Page size or Type on print settings confirmation screen. The setting is the same as the setting for the photo included in the print job.

  4. Press Color button.

    The reserved photo is printed next to the photo that has already been started printing.

    If you want to print more photos, operate from step 1 again.

Note

  • While processing the print job, you cannot display the HOME screen, change the print menu, or print from the computer or other devices.
  • While processing the print job, the photo in other group is not selected.
  • If you press the Stop button while processing the print job, the screen to select a method to cancel reservation is displayed. If you select Cancel all reservations and press the OK button, you can cancel printing all photos. If you select Cancel the last reservation and press the OK button, you can cancel the last printing job.
  • If there are many print jobs, Cannot reserve more print jobs. Please wait a while and redo the operation. may be displayed on the LCD. In this case, wait a while and add the print job.